Summary

In version 3.1.29 we've focused on making your experience better, faster, and safer.

This new release is all about making your life easier. It's smoother and quicker, and we've squashed a few bugs that were causing issues with backups, identifying devices, and communication within the system. 🐞🔨

We've also added some great new features: devices now show up faster, system logs are just a click away, and we've added a nifty new feature for better control. 💡 We've evened out light readings across different sensors for consistent results and brought in support for a new converter to work with more devices. 🌈🔌

Highlights

Fixes

• Fixed problem with triggering identification with Glamox Connect

• Fixed problem with connecting with Cloud Service after reboot Vertex

• Fixed an issue with triggering actions on devices when Vertex has a broken port

• Not refreshing group in mqtt after changing it in UI

• Fixed issue information about emergency light mode in Modbus registers

• GUI: Fixed issue with generate backup

• Node-RED: Setting Advances DALI properties from dali2devs node

• Node-RED: Optimization of the feedback block causes a problem in flow

• Node-RED: Fixed light sensor instans in dali2devs common node

• Node-RED: Fixed sensor reset function in NodeRed

• Node-RED: Nodered fix feedback, added checkbox "send on change"

• Node-RED: The Mac filter in CCT block showed the default value, not the selected one

• Node-RED: Fixed issue with publishing feedback between Vertexes in NodeRed

Features

• GUI: Added 5 minutes timeout to indentify command. It will disable automatically after that time

• Improved first scan of devices

• Added default parameters for Lunatone 86457786-INT-AQ sensor

• Node-RED: Support for sensors with bigger resolutions

• Node-RED: Harmonization of light measurement for sensors with different resolution

• Node-RED: Added support for new DMX RS232<->USB converter

• Node-RED: Added the selected vertex to the TOPIC of cct node messages

Software download

Summary

In this version, the system component responsible for communication has been updated (service update).

Highlights

Fixes

• Fixed an issue with Vertex controllers showing as offline in the UI.

• Fixed an issue with loading data into the UI. The UI was showing "Refreshing" all the time.

• Node-RED: Fixed sending registers from the vertex modbus node.

Features

• Node-RED: Added a message filter in the CCT node (now only one node in the cluster sends a message).

• Node-RED: Optimization of the Vertex feedback node - it sends messages only on the Vertex where the given group physically exists.

Software download

Fixes

• Node-RED: Fixed Node-RED restarting after selecting “No movement” filter on motion sensor instances in Dali2devs and Dali2devs Common nodes.

Software download

Summary

This release introduces support for Lunatone environmental sensors and simplified programming in Node-RED.

Highlights

Fixes

• Node-RED: Fixed dimming scale for Toltecs in VertexAction node.

• Node-RED: Fixed problem with Daylight Harvesting on multiple groups.

• Node-RED: Fixed problem with omitting actions while more than one actions was triggered in the same time.

• Node-RED: Fixed vertex action node operating for direct value mode in action: “set colour temperature” (jump CCT for more than one Vertex in cluster).

• Fixed problem with displaying of DALI-2 devices after switching the bus or Vertex.

• Fixed rules of displaying “port overflow” error. You can have maximum 64 luminaires and additionally up to 8 DALI-2 devices (such as sensors and panels) on one bus.

Features

• Added support DALI-2 for Lunatone environmental sensors.

• Node-RED: Simplified the Daylight Harvesting node (see Daylight Harvesting). Old way of using nodes still works.

• Node-RED: Added support for multisensors with many motion instances.

Software download

Summary

This release is focused on fixing bugs.

Highlights

Fixes:

• Node-RED: Disabled the automatic node naming. After creating several of the same nodes and naming one, the other nodes were given the same name. Now unconfigured nodes remain unnamed.

• Node-RED: Sending wrong statuses (repeating events) - fixed a bug from 3.1.14 - OFFICIAL

• Node-RED: Fixed the bug with blocking nodes. Sometimes the node could not be opened for configuration - now it works.

• Resolved a problem that causes Vertex to freeze while communicating between the front panel and the daliserver.

Software download

Summary

This release focuses on the Dali2 Devs Common node and fixes changing the device parameters.

Highlights

Fixes:

• The problem with the updating Vertex software directly from the production version to the latest version has been solved.

• The operating of the port status LED (PORT1, PORT2, PORT3) on the Vertex’s front panel has been fixed. Now they emit continuous light when short-circuit appears, exactly as it was said in the Troubleshooting section: The most common errors.

• GUI: The problem with the “lamp failure” notification not appearing has been fixed. Now, the notification appears e.g. if the light source is broken.

• GUI: The problem with the setting of the parameters “Power on level” and “System failure” for Multi Type and Colour Control type of devices has been fixed.

• GUI: Advanced DALI-2 settings (Hysteresis and Dead timer) have been fixed.

• Node-RED: The saving and reading of the transition time (T2) parameter of the Motion Sensor in the Dali2 Devs Common node have been fixed. Note that refreshing new parameters may take a while.

• Node-RED: The triger of the transition parameter of the Motion Sensor in the Vertex Action node has been fixed.

• Node-RED: The problem with parameters in DALI2 Devs Common not keeping values has been investigated and solved. Devices with a “no communication” status can’t be set. You can’t also copy a node with parameters of the device in this status (nothing will be copied). Now, the “NC” mark has been added to the device’s name so that you can avoid trying to set them up. See the warnings added to the articles about the Control panel and /wiki/spaces/ME/pages/2089353231.

• Node-RED: The problem with switching from Normal to the ESDIM mode for the DALI input in Dali2 Devs Common node has been fixed.

Software download