Before you start
Make sure that the IP addresses of the gateways will be consistent, either by IT binding the mac address to a static IP (recommended) or by assigning static IP
The Access point WebUI from 5. will list all gateways on the network with current settings as long as multicast is enabled in the network
For Wireless Zigbee, log in to the web ui of the gateway to set IP if needed
For Ethernet2Dali, see Commissioning - step by step E2D commissioning
For DALI Complete you need to use an external tool, as the DALI gateway does not provide any WebUI
Recommended to use free software like for example Lantronix - Device installer
...
Connect the gateways to power and ethernet.
If DALI gateway, also connect DALI line(s)
Connect the access point (LMS CONNECT RevPi Core 3 8 GB) to 24 V power and ethernet.
Make sure the access point has access to the network where the gateways are connected.
...
5. Go to URL http://GlamoxConnectCore<serial>.local
Example: http://GlamoxConnectCore30288GlamoxConnectCore30288.local- if the serial is 30288
| Note |
|---|
If your access point can’t find the gateways the main issue is probably that they are not on the same network. You can try to connect to the network yourself and search for devices - see “Alternatively”. |
...
8. Login to Glamox Connect using your existing user, or by creating a new User registration.
9. Create a new site a adopt the access point to your site Setting up a new site.
Network setup
Multicast (optional, access point to discover gateways)
DHCP (optional)
Internet access
...
For information on setting up Ethernet2DALI, see our own documentation space for this system
https://glamox.atlassian.net/wiki/spaces/E2D Ethernet2Dali
Tested 4G modems
Huawei E3531
...