1. Connect the gateways to power and ethernet

   • If DALI gateway, also connect DALI line(s)

2. Connect the access point to 24V power and ethernet

3. Make sure the access point has access to the network where the gateways are connected

   • Only the access point speaks to the Glamox Connect cloud. The access point communicates with all gateways and administer the two-way communication between the gateways and the cloud

4. Check the serial number on front of access point (5 digits)

5. Go to URL http://GlamoxConnectCore<serial>.local, for example http://GlamoxConnectCore30288.local if the serial is 30288

6. Make sure that the IP addresses of the gateways will be consistent, either by IT binding the mac address to an static IP (recommended) or by assigning static IP

   • The Access point WebUI from 5. will list all gateways on the network with current settings as long as multicast is enabled in the network

   • For Wireless Zigbee, log in to the web ui of the gateway to set IP if needed

   • For Ethernet2Dali, use Firestarter app to set up IP addresses of gatewayssee https://glamox.atlassian.net/wiki/spaces/E2D/overview

   • For DALI Complete you need to use an external tool, as the DALI gateway does not provide any WebUI

     • Recommended to use free software like for example Lantronix - Device installer

...

Follow gateway manual to go to admin page, default http://192.168.0.211.
You can change the network settings of the gateway under “Network settings”.

Ethernet2DALI

For information on setting up Ethernet2DALI, see our own documentation space for this system
https://glamox.atlassian.net/wiki/spaces/E2D/overview

Access point

The access point is a linux computer, in the form of a Kunbus RevPi Core 3+. This is a industry grade Raspberry Pi 3+ compute module, running a customized linux distribution.

...