The Floorplan gives you an graphical overview of your installation. You can see the ON/OFF status of all devices in addition to any faults you may have. The floorplan is interactive, so you can zoom and pan to get exact view you like.
The ON/OFF status is shown by either having the luminaire icons yellow (ON) or black (OFF). Faults are shown in red, either by the emergency icon being red, or by having a red exclamation point (❗) next to the luminaire.
By clicking on a device you will get a sidebar with more information, like ON level for luminaires and sensor data for sensors. From the sidebar you can also go directly to the detail page of the device.
On the top right you also have some filters and options
Filters: You can filter out what you want to show in the floorplan by device type
Show only faults: Hide devices with no faults and show only faults. If no faults, the floorplan will be empty
Floorplan selector: If you have multiple floorplans, you can switch between them in this selector. The order is the same as set in the Site settings. If you have faults on other floorplans, these will be marked with a red exclamation point (❗) in the selector.
The Floorpan tab is only a view. To edit the floorplan and position of devices, go to Settings - Site - Site layout (Settings)