Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Identify the phase dimmer in the E2D UI.

  1. Go into the Vertex UI.

  2. Go to [1] Device list tab located on the left side of the screen.

  3. The Phase Dimmer instance will be visible in General lighting section [2]. You can group it with other luminaires or create a new group. Read Grouping of luminaires if you don’t know how to do that.

  4. Use the Identification button [3] to locate your device.

If you have several lightbulbs connected to the phase dimmer, you see them as one DALI address in Vertex UI. They are controlled like a single DALI luminaire, so you can’t dim them individually.

Program the phase dimmer in Node-RED

[{"id":"48c64e7.cdb30b","type":"tab","label":"Flow 1","disabled":false,"info":""},{"id":"9cead85a.287808","type":"dali2devs","z":"48c64e7.cdb30b","name":"","uid":"00E19278B125080C63","dali2dev":"0","devStatus":2,"instanceType":1,"dali2t1":90,"dali2t2":"","instanceData":{"InstanceStatusFlags":2,"InstanceType":1,"Resolution":1,"InstanceError":false,"InstanceActive":true,"InstanceGroup0":255,"InstanceGroup1":255,"InstanceGroup2":255,"EventScheme":2,"EventPriority":3,"EventFilter":84,"EventFilterSize":1,"FeatureType":[],"InputValue":0,"InstanceDetails":{"ShortTimer":25,"ShortTimerMin":10,"DoubleTimer":0,"DoubleTimerMin":10,"RepeatTimer":8,"StuckTimer":20},"DataModelRecipe":["Dali2Instance301_config"],"INSTNR":0},"mode":"normal","x":370,"y":320,"wires":[["14d07997.6ab626"]]},{"id":"14d07997.6ab626","type":"vertex action","z":"48c64e7.cdb30b","name":"","typeButton":"single","bPayload":{"action":"setbrightness","group":"f301962948b79871933f2bcb04b2fd2a","param":"16","priority":"254"},"bState":false,"defaultpriority":true,"x":590,"y":320,"wires":[["1423ed39.1dede3"]]},{"id":"1423ed39.1dede3","type":"vertex cluster","z":"48c64e7.cdb30b","rate":90,"x":810,"y":320,"wires":[]}]

  1. Go to the Node-RED. In the dali2devs or DALI2 Devs Common node, in the Serial Number field, you can choose the correct phase dimmer unit.

  1. If you want to dimm the luminaires using a button, go to the Dimming button article.

  2. If you want to have the luminaires controlled using a presence/motion sensor, go to the /wiki/spaces/ME/pages/2089353231 article.

  • No labels