To correctly commission self test emergnecy luminaires you must know the brand/emergency module part code. This will impact which emergency type you choose in profile settings and the results within the automated emergnecy lighting report.
If you do not have the neccessary information regarding the emergency module, contact your Sales representative for further support.
For Self-Test emergency modules only.
How to setup integrated self test emergency luminaires
Select the ‘Profiles’ tab [1]. Select/create the profile you wish use for the installed luminaires [2]. Enter the Components view [3].
Open the Emergency Module drop down list [4] and select the matching emergency module [1].
Remember to save changes!
Enter the Luminaires tab [5].
Select the device(s) on the drawing which has integral emergency.
Click Configure [6].
Select the light grey box next to ‘Emergency’ [7] The selected device will now be marked with an
for emergency.
Add Comment