From Glamox Connect you can do some simple light control, across DALI lines and across system/technology. In most cases Glamox Connect do not change the local configuration, so you can add to your local configuration with scenes and groups in Connect.
Groups
In Light Control → Groups you can view, edit and add your own groups that you later can send or schedule commands to. You can create groups from all light devices, regardless of system or gateway separation.
To create a new groups, click on Add groups.
Use filters to limit the search result if necessary, mark the devices you want to include in the room and click Add to add the marked devices to the group. Give the group a name and click Save
Scenes
To view or add scenes, go to Light Control → Scenes.
Scene overview
In the scene overview you can view all you scenes, run manual scenes and edit the behavior of your scenes.
To show selected scene(s) in your Overview dashboard, check Show in overview for the scene(s) you want.
A scheduled scene can be activated and deactivated. When deactivated, the scene will not run and the local scene level be unchanged.
Add new scene
To add a new scene, click on New scene. Give the scene a name, choose group(s) that scene should be active for, select scene type and parameters and finally choose way of recalling the scene.
Scene types
Set level
Set brightness level and/or color temperature to desired level
Night mode
Set a different brightness level for a scene (local scene number) for a given time period. This is typically where you have sensors recalling a scene based on occupancy. This way you could have a different automatic light level in certain time periods. As this is based on recalling scenes, the light level can still be manually overridden in local installation.
Night mode is exception to the rule of using local configuration. Pending on selected local scene number, Glamox Connect will replace the scene level in the given time period for the selected local scene on the device. Glamox Connect will set this back to original level when given time period expires.
Scene triggers
Manual
Manually triggered scenes using button in Glamox Connect
Time
Time scheduled triggering at chosen time and day(s).
For night mode this is start and end time of the time period you want a different light level.