Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

There are two ways you can set up dimming functions in your system:

  • Using two buttons (one for dimming up and one for dimming down)

  • Using one multifunction button (ESDIM) where short press toggles ON/OFF function and long press toggles dimming up and down.

ESDIM (ON, OFF, Dimm Up, Dimm Down) - One Multifunction Button

Import the ready made flow using the instructions here: Importing a Node-RED flow or follow the instructions below.

[{"id":"be58292a.057758","type":"tab","label":"Flow 8","disabled":false,"info":""},{"id":"6ab8e733.df3ce8","type":"vertex action","z":"be58292a.057758","name":"ON/OFF","typeButton":"toggle","bPayload":{"ON":{"action":"setbrightness","group":"0efc9ef58896d0b1839b65d7af598531","param":"100","priority":"254"},"OFF":{"action":"setbrightness","group":"0efc9ef58896d0b1839b65d7af598531","param":"0","priority":"254"}},"bState":false,"defaultpriority":true,"x":830,"y":220,"wires":[["ebbd9eb5.5f16d"]]},{"id":"36f9a54b.2a2dfa","type":"vertex action","z":"be58292a.057758","name":"DIMM UP/DIMM DOWN","typeButton":"dimm","bPayload":{"DON":{"action":"noreact","group":"0efc9ef58896d0b1839b65d7af598531","param":null,"priority":"254"},"HOLDUP":{"action":"upaction","group":"0efc9ef58896d0b1839b65d7af598531","param":null,"priority":"254"},"HOLDDOWN":{"action":"downaction","group":"0efc9ef58896d0b1839b65d7af598531","param":null,"priority":"254"},"DOFF":{"action":"noreact","group":"0efc9ef58896d0b1839b65d7af598531","param":null,"priority":"254"}},"bState":false,"defaultpriority":true,"x":720,"y":300,"wires":[["ebbd9eb5.5f16d"]]},{"id":"38b3e4ca.ac5d4c","type":"function","z":"be58292a.057758","name":"","func":"if(msg.payload.UP !== undefined || msg.payload.DOWN !== undefined){\n    return msg;\n}","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":660,"y":220,"wires":[["6ab8e733.df3ce8"]]},{"id":"a3978b5c.180458","type":"DALI2 Devs Common","z":"be58292a.057758","name":"LOWER PB","outputs":1,"uid":"0000000829E23C254C","devStatus":2,"devSettings":[{"InstanceType":1,"isDisabled":false,"mode":"dimmb","evenFilters":212},{"InstanceType":1,"isDisabled":true,"mode":"normal","evenFilters":84},{"InstanceType":1,"isDisabled":true,"mode":"normal","evenFilters":84},{"InstanceType":1,"isDisabled":true,"mode":"normal","evenFilters":84}],"savedSettings":[{"InstanceType":1,"isDisabled":false,"mode":"dimmb","evenFilters":212},{"InstanceType":1,"isDisabled":true,"mode":"normal","evenFilters":84},{"InstanceType":1,"isDisabled":true,"mode":"normal","evenFilters":84},{"InstanceType":1,"isDisabled":true,"mode":"normal","evenFilters":84}],"x":390,"y":220,"wires":[["38b3e4ca.ac5d4c","36f9a54b.2a2dfa"]]},{"id":"ebbd9eb5.5f16d","type":"vertex cluster","z":"be58292a.057758","rate":90,"x":1090,"y":220,"wires":[]},{"id":"c67e285c.b3af38","type":"vertex feedback","z":"be58292a.057758","name":"","primarygroup":"0efc9ef58896d0b1839b65d7af598531","sendOnChange":true,"x":660,"y":140,"wires":[["6ab8e733.df3ce8"]]}]

Step-by-step instructions

  1. Find the following nodes in the palette on the left side of the Node-RED

  • DALI2 Devs Common

  • function node

  • vertexd feedback

  • vertex action x2

  • vertex cluster

  1. Drag the nodes and drop them onto the workspace.

  2. In the DALI2 Devs Common node choose the pushbutton panel you wish to use and select its mode as ESDIM.

  1. In the function node, paste the code given below. It filters certain messages, so that the usage of two vertex action nodes via one button instance is possible.

if(msg.payload.UP !== undefined || msg.payload.DOWN !== undefined){
    return msg;
}

  1. Configure the vertex action nodes as shown below.

  1. In the vertex feedback node select the same group that you want to control with dimming functionality. The feedback nodes ensures that, when the group level is triggered by another action in the flow, the ON/OFF vertex action node will be notified of the actual light level and trigger appropriate action. Thanks to this, the “double click“ issue is solved.

Don't forget to connect all your nodes and be sure that the vertex cluster node is present in your flow! 

Then click Deploy button at the upper-right corner of the Node-RED.

Dimm Up & Dimm Down Buttons

Import the ready made flow using the instructions here: Importing a Node-RED flow or follow the instructions below.

[{"id":"9d9261ef.1d337","type":"DALI2 Devs Common","z":"c0f5917a.1cc76","name":"","outputs":4,"uid":"00D57389932DCF770E","devStatus":2,"devSettings":[{"instanceType":1,"isDisabled":false,"mode":"normal","evenFilters":84},{"instanceType":1,"isDisabled":false,"mode":"normal","evenFilters":84},{"instanceType":1,"isDisabled":false,"mode":"dimmb","evenFilters":84},{"instanceType":1,"isDisabled":false,"mode":"dimmb","evenFilters":84}],"savedSettings":[{"instanceType":1,"isDisabled":false,"mode":"normal","evenFilters":84},{"instanceType":1,"isDisabled":false,"mode":"normal","evenFilters":84},{"instanceType":1,"isDisabled":false,"mode":"dimmb","evenFilters":84},{"instanceType":1,"isDisabled":false,"mode":"dimmb","evenFilters":84}],"x":460,"y":400,"wires":[["6c51f7a7.b2f768"],["8f85d6e8.a046f8"],["f334a1d6.f24f4"],["56162c55.f8b3e4"]]},{"id":"6c51f7a7.b2f768","type":"vertex action","z":"c0f5917a.1cc76","name":"ON","typeButton":"single","bPayload":{"action":"maxlevel","group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"},"bState":"","defaultpriority":true,"x":720,"y":360,"wires":[["97c3bacc.68e538"]]},{"id":"97c3bacc.68e538","type":"vertex cluster","z":"c0f5917a.1cc76","rate":5,"x":1070,"y":400,"wires":[]},{"id":"8f85d6e8.a046f8","type":"vertex action","z":"c0f5917a.1cc76","name":"OFF","typeButton":"single","bPayload":{"action":"off","group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"},"bState":"","defaultpriority":true,"x":720,"y":400,"wires":[["97c3bacc.68e538"]]},{"id":"f334a1d6.f24f4","type":"vertex action","z":"c0f5917a.1cc76","name":"Dimming down","typeButton":"dimm","bPayload":{"DON":{"action":"setbrightness","group":"ff94a09f3810e83641da0e48ea02a61f","param":"80","priority":"254"},"HOLDUP":{"action":"downaction","group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"},"HOLDDOWN":{"action":null,"group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"},"DOFF":{"action":null,"group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"}},"bState":false,"defaultpriority":true,"x":750,"y":440,"wires":[["97c3bacc.68e538"]]},{"id":"56162c55.f8b3e4","type":"vertex action","z":"c0f5917a.1cc76","name":"Dimming up","typeButton":"dimm","bPayload":{"DON":{"action":"minlevel","group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"},"HOLDUP":{"action":"upaction","group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"},"HOLDDOWN":{"action":null,"group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"},"DOFF":{"action":null,"group":"ff94a09f3810e83641da0e48ea02a61f","param":null,"priority":"254"}},"bState":false,"defaultpriority":true,"x":740,"y":480,"wires":[["97c3bacc.68e538"]]},{"id":"498551e7.3ee72","type":"comment","z":"c0f5917a.1cc76","name":"Select and configure a panel","info":"## Clear 4 checkboxes to have 4 buttons to manage. Set the Mode as Normal. You don’t need to change Event filters.\n\n","x":480,"y":340,"wires":[]},{"id":"d17f9577.007ec8","type":"comment","z":"c0f5917a.1cc76","name":"Define actions for 4 buttons","info":"## 1. Select mode as Single button.\n## 2. Select the right group.\n\n","x":770,"y":320,"wires":[]}]

Step-by-step instructions

  1. Find the following nodes in the palette on the left side of the Node-RED

  • DALI2 Devs Common

  • vertex action x4

  • vertex cluster

2. Drag the nodes and drop them onto the workspace.

3. In the DALI2 Devs Common node, in the Serial Number field, select the panel you want. In this field, you have a list of all DALI devices found by your Vertex controller.

Make sure that the multisensor is properly connected to the Vertex. If not, you won’t be able to set up the parameters. The device with “no communication” status is marked as “NC” at the beginning of the name.

4. Below you have outputs of every Input Unit device - normally they are disabled. Clear 4 checkboxes to have 4 buttons to manage. Set the Mode as Normal for buttons that trigger constant light and ESDIM for dimming buttons. ESDIM mode provides you with more message structures that are used to ensure proper dimming functionality.

5. You have 4 vertex action nodes for the same number of buttons. In these nodes set:

  • 1st button for turning on the light:
    Set the name as e.g. ON. Then select the Mode as Single button. Then you need to define action as Recall max level and choose the luminaire group you want to control.

  • 2nd button for turning off the light (OFF):
    Here, you need only to change the action to Recall off.

  • 3rd button for dimming:
    Set the name as e.g. Dimming down. Then select the Mode as Dimm button. Select the first action as Set brightness, e.g. 80% - this is the brightness level you want to start dimming. The second action set Step down cyclically. In this configuration with one click, you set 80% brightness level and when you click and hold you can dim it down to the preferred level.

  • 4th button for Dimming up:
    Set the name as e.g. Dimming up. Then select the Mode as Dimm button. Select the first action as Recall min level - this is a brightness level you want to start dimming. The second action set Step up cyclically. In this configuration with one click, you set a minimum brightness level and when you click and hold you can dim it up to the preferred level.

Don't forget to connect all your nodes and be sure that the vertex cluster node is present in your flow! 

Then click Deploy button at the upper-right corner of the Node-RED.

After you select the Deploy button - the blue dots on the nodes should disappear. The green squares will then appear to show the current status of the devices. It means that the viewed flow is already sent to VERTEX.

  • No labels