/
Filtering devices

Filtering devices

Filtering devices is a function used to find devices on a certian profile. This function will work on both simulated and identified devices.

  • It can be a form of verification if all luminaires are on a desired profile.

  • It can be used when you want to change devices from one profile to another to see only devices on the original profile.

Step by step instruction

  1. Enter the Luminaires tab [1]. Filtering devices works on all three sections: Locate, Confgure and Link.

  2. Long press the Filter button [2].

    image-20241024-131858.png


    A box will apear to determine if you want to filter for only Emergency luminaires or all lumianires. Select your choice.

image-20241024-094032.png

  1. On the right side of the dettings box you will have an additional bar with all your profiles. Select all profiles you are interested in seeing devices with [3]. In this case we chose to see all profiles exept for profile 100.

  2. Click on the Filter button [4].

    image-20241024-131959.png

The filter button will become will turn orange [5] and all your devices without the selected profiles will become invisible [6].

image-20241024-132024.png

  1. When you are finished simply click on the Filter button again and all other devices will apear.