Connecting DONGLE (BLE)

The DONGLE BLE is a device that you might be needing to update the WR CPW2-SEN and/or WR CPW-SEN to software version 6.8.135 used with the LMS Wireless Kinetic Switch.

Connecting the LMS WIRELESS DONGLE BLE is a little different to connecting the regular DONGLE.

Before using this device make sure that there are no new updates of Tablet App waiting for you in the App store. Without newest software this component will not work.

When connecting a BLE DONGLE make sure that all regular DONGLE devices you have in the system are disconnected.

Step by step instructions

  1. Make sure you have turned on the BLE Glamox Dongle using the black switch on the side of the device.

  2. Click the Bluetooth icon.

  3. Select 'GlamoxDongle' from the drop down menu [1]

image-20240812-091025.png
  1. Choose 'No' to “Include MicroSet Devices?”

image-20240814-084649.png

The tablet app might ask you if you want to initiate pairing, if this happens, agree to the request.

Once the BLE DONGLE is connected, the Bluetooth icon will trun from GREY to BLUE and a pop-ip message will dislpay you have successfully connected.