4. Connecting a DONGLE

Owned by Katarzyna Stodolny
Last updated: Sept 27, 2024 by Joanna Kozakiewicz
2 min read

Necessary components

Step by step instructions

  1. To connect a new DONGLE to the tablet select the Bluetooth Icon [1] and select 'LiteIPMate' from the drop down menu [2].

image-20240924-101901.png

If you are connecting a BLE DONGLE, please select ‘GlamoxDongle’ from the drop menu and select 'no' when asked to include MicroSet.

  1. The app will start scanning for the nearest DONGLE(s) and will display them in a list [3]. This may take 20 seconds to a minute.

image-20240924-101833.png

  1. Look on the back of the DONGLE to find the matching MAC address and click ‘Connect’ on the correct DONGLE in the app list [4].

  1. Once the DONGLE has connected, the Bluetooth icon will change from Grey to Blue.

If it doesn't connect:

  • Check DONGLE is On and Awake (Green LED is On or Flashing).

  • Check Mac address (beside Bluetooth icon on Tablet) matches DONGLE.

The Mac address of the DONGLE is on the label on the back of the device.

IF MAC address starts with 10:**:**:**:**, THEN first two characters are 60:8A

Otherwise,

IF MAC address starts with 66:**:**:**:**, THEN first two characters are 00:06

The next step: Identifying luminaires (on-site)