CAD

Overview

The CAD settings are related to the CAD import and export functionality.

The Quality slider determines the default value used for CAD import. This quality can also be adjusted directly from the CAD window.

The default CAD application will be used for CAD export. 

CAD Application

Layer name Luminaires

The regular luminaires will be exported to this layer.

The color will determine the color of all luminaires.

Layer name Emergency Luminaires

Same as for layer name luminaires, except this is for emergency luminaires.

Layer name Room

The room (wireframe) will be exported to this layer. 

Panelled ceiling layer name

The grid (panelled ceiling) will be exported to this layer. 

Layer name curves

The ISOLux-curves for the normal lighting calculation will be exported to this layer.

ISOLux curve colors are predefined and cannot be changed. 

Layer name Luminaires

Same as for layer name curves, except this is for emergency calculation. 

Export Room

Check this to enable the export of room surfaces (wireframe). 

Export Curves

Check this to enable the export of ISOLux-curves. 

Export Grid

Check this to enable the export of grids (panelled ceiling). 

Rotation

External luminaire symbols can be drawn with 0 degrees in a different direction from OptiWin's defined direction. By setting a rotation angle in degrees here, all symbols in this application will be rotated additionally. 

Attributes 

Name

Name of attribute 

Type

Attributes can be given a fixed value or a value related to the luminaire or room it is representing. Choose from list.

When selecting Fixed value, enter value in column to the right.

Attribute name will get a default value matching the Attribute type. Attribute layer will be selected according to Type.

Attribute types are divided in 3 categories; Luminaire, Room and Curves.

Room and Curves positions are related to the lower left corner of the room, while Luminaire attributes are related to the center of the luminaire. 

Height, Rotation/X/Y

Heigt, Rotation and placement of lower left side of attibute related to the blocks insertion point (Normally center point). 

Visible

Whether the attribute should be visible in drawing or not. 

Layer name

The name of the layer this attribute should be placed on. If not given, the block layer name will be used.