/
Wireless Bluetooth sensor + bridge + kinetic switch

Wireless Bluetooth sensor + bridge + kinetic switch

You can connect Wireless Kinetic switches to the Ethernet2DALI system using our Wireless Bluetooth (Casambi) sensor or bridge.

image-20250717-104242.png

LMS E2D DALI-2 PIR SENSOR WIRELESS BLUETOOTH

SD360-8-BC

SD-CD2.png

LMS E2D DALI-2 KINETIC SWITCH BRIDGE

SD-CD2

Kinetic_switches_variants.png

 

LMS WIRELESS WH/BL KINETIC 2B/4B BLE SWITCH

B12202108 / B12202109 / B12202208 / B12202209

How to use it in the LMS design?

The sensor or bridge wirelessly extends the DALI bus, acting as a gateway between E2D (Vertex) and the Casambi network. After pairing, wireless devices can be configured and used like standard wired DALI devices.

Do not exceed the permissible number of connected switches - see https://glamox.atlassian.net/wiki/x/AIF-aQ.

How to commission it?

Sensor

The sensor is automatically detected and visible by Vertex as soon as it is connected.

https://glamox.atlassian.net/wiki/x/D4DAlw

Bridge

The bridge is automatically detected as soon as it is connected, but it isn’t visible in the Vertex UI.

Kinetic Switch

For the Vertex to detect your Kinetic Switch, you must first pair it using the Casambi app:

  1. Download the app (available in the App Store and Google Play).

  2. Create a new network and pair your Casambi devices.

  3. Detect the Kinetic Switch according to the app's instructions - you must touch your phone to the switch (NFC). The Kinetic Switch is not yet visible to the Vertex.

  4. Share switch data:

casambi1.png

Go to the Gateways

casambi2.png

Select your sensor or bridge

 

casambi3.png

Go to the GATEWAY PARAMETERS section and activate Export switches.

  1. The Kinetic Switch is now visible in Vertex and can be configured.