5. Adopting gateways
Adopt gateways
When the access point is back online, you can start adopting gateways from your local setup. If your network has multicast enabled, the access point will discover gateways and list the possible gateways for you to adopt. If this is not the case you can adopt gateways manually, by entering necessary information like ip address, mac address and more.
First, select the access point you want to connect the gateways to.
Then you can proceed to click Adopt next to the gateway(s) you want to adopt.
If the system can not automatically find any gateways, then jump to https://glamox.atlassian.net/wiki/spaces/GCDOC/pages/3945988097/5.+Adopting+gateways#Troubleshooting---Adopt-gateway-manually
For Wireless Radio, only one gateway (LMS WIRELESS ACCESS POINT) is required to be adopted and will act as the ‘master’ gateway to the LMS CONNECT Access Point.
Complete the information about the chosen gateway (contact LMS support if needed).
For Wireless Radio, the Post Code is a Site ID, which you can find in the Wireless Radio Dashboard or on the commissioning tablet.
When you are done adding gateways to the access point, press Reload configuration in the next step. Not pressing reload will cause the gateways to be displayed as faults.
Troubleshooting - Adopt gateway manually
Select Adopt gateway manually.
Select the system from the drop-down menu.
Complete the information about the gateway.
Click Adopt.