4. Adopting an access point
Selecting systems
First, you need to set up the local systems you want to integrate.
Go to Settings - Site - Site setup to set up your components with Glamox Connect.
Click the Connect system(s) drop-down menu and select the system(s) you have installed and want to integrate.
Click Update.
Adopt access point
The next step is to adopt LMS CONNECT Access Point to your site. This is done by entering information found on your access point: the last 4 digits of the mac address and the 5 digit serial number.
The LMS CONNECT Access Point MAC address and serial number can be found on a sticker included in the product box. Make sure this is stuck on the front of the relevant LMS CONNECT Access Point enclosure for future reference.
Click on the Access point drop-down menu and enter the LMS CONNECT Access Point details.
Click Adopt.
Glamox Connect will then start the deployment process, adding the access point to your site. This includes adding security certificates and more. This process could take up to 15 minutes. When this process is done, you will be able to start adopting gateways.