General (Settings)

The general setup contains options for all various parts of the application.

Misc.

"Default for new projects" sets the default Energy calculation standard for new projects. Changing this value will not affect existing projects.

Forms

Here you can configure the application background color.

Most dialogues use both colors as a gradient from the top to the bottom.

Standard values room

These are the standard values used when creating a new room.

See the room chapter for more information about these settings.

Standard values reflection

These are the reflection values which will be shown in the drop-down list in the room dialogue.

Calculation

Here you can enable additional calculations which are required in some countries.

The LG7 and EMin emergency calculations are used for lighting calculation.

The LL/CW factor is calculated for each luminaire type in the energy evaluation.