Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Glamox Wireless Radio is based on the principle that all luminaires have the same rank in the network. There are no masters, or all are masters. From the system point of view all luminaire contains a luminaire controller and, if possible, a sensor.

All devices only need 230 V mains with exception of a battery powered scene controller and the key fob scene controller.

The dynamic grouping makes the system flexible without limiting the installation to typical parameters as Number of groups or Number of devices belonging to a group.

The parameter that set some limitations for this system is related to the environmental conditions for wireless communication on the building site. In complex installations with steel ceiling structures etc. we recommend adding some Luminaire controllers to be used as repeaters in the installation.

There are also some limitations on the range for the Access points so please remember that a device can communicate with more than one access point. Adding a new access point will NOT lead to the new commissioning of the existing network. So if you are uncertain if you need another access point just add one.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.