Connect the gateways to power and ethernet
If DALI gateway, also connect DALI line(s)
Connect the access point to 24V power and ethernet
Make sure the access point has access to the network where the gateways are connected
Only the access point speaks to the Glamox Connect cloud. The access point communicates with all gateways and administer the two-way communication between the gateways and the cloud
// TODO: IP, connect to AWS, setup lambda (gw ip), config search
Access point
The access point is a linux computer, in the form of a Kunbus RevPi Core 3+. This is a industry grade Raspberry Pi 3+ compute module, running a customized linux distribution.
The device is set up to receive IP via DHCP. To set up static IP, contact Glamox technicians.
For Glamox technicians to reach the device, it is set up with ZeroTier. This requires UDP 9993 to be open out of the network. If the network is set up with DHCP, it will automatically connect, and the technicians can reach the device. As a fallback, a USB 4G modem can be connected to bypass any firewalls while setting up the system.
Tested 4G modems
Huawei E3531
Network requirements
DHCP