Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

This article is divided into two sections, depending on the type of DONGLE you have. Please follow the specific connecting instructions:

Step by step instructions for LMS WIRELESS DONGLE

  1. To connect a DONGLE to the tablet select the Bluetooth Icon [1] and select 'LiteIPMate' from the drop down menu [2].

image-20240924-101901.png

  1. The app will start scanning for the nearest DONGLE(s) and will display them in a list [3]. This may take up to a minute.

image-20240924-101833.png

  1. Look on the back of the DONGLE to find the matching MAC address and click ‘Connect’ on the correct DONGLE in the app list [4].

image-20240924-102116.png

  1. Once the DONGLE has connected, the Bluetooth icon will change from Grey to Blue.

image-20240924-105136.png

If the DONGLE doesn't connect:

  • Check DONGLE is On and Awake (Green LED is On or Flashing).

  • Check Mac address (beside Bluetooth icon on Tablet) matches DONGLE.

The Mac address of the DONGLE on the label on the back of the device.

IF MAC address starts with 10:**:**:**:**, THEN first two characters are 60:8A

Otherwise,

IF MAC address starts with 66:**:**:**:**, THEN first two characters are 00:06

Step by step instructions for LMS WIRELESS BLE DONGLE

The DONGLE BLE is a device that you might be needing to update the WR-G4 devices like CPW2-SEN, CPW-SEN and some controllers to software version 6.8.135+ used with the LMS Kinetic Switch.

Connecting the LMS DONGLE BLE is a little different to connecting the regular DONGLE.

Before using this device make sure that there are no new updates of Tablet App waiting for you in the App store. Without newest software this component will not work.

When connecting a BLE DONGLE make sure that all regular DONGLE devices you have in the system are disconnected.

  1. Make sure you have turned on the BLE Glamox Dongle using the black switch on the side of the device.

  2. Click the Bluetooth icon and select 'GlamoxDongle' from the drop down menu [1].

image-20240812-091025.png

  1. Choose 'No' to “Include MicroSet Devices?”

image-20240814-084649.png

The tablet app might ask you if you want to initiate pairing, if this happens, agree to the request.

Once the BLE DONGLE is connected, the Bluetooth icon will trun from GREY to BLUE and a pop-up message will dislpay you have successfully connected.

image-20240814-085000.png

↪ The next step: Identifying luminaires (on-site)

  • No labels