To correctly commission selt test emergnecy luminaires, as a commissioning engineer, you must know the brand/emergency module part code. This will impact which emergency type you choose in profile settings and the results within the automated emergnecy lighting report.
If you do not have the neccessary information regarding the emergency module, contact your Sales representative for further support.
How to setup integrated self test emergency luminaires
Click the ‘Profiles’ tab.
Select/create the profile you wish use for the installed luminaires.
Select the matching emergency module make/model [1].
Click ‘Save Changes’.
Click Luminaires [2].
Select the device(s) on the drawing which has integral emergency.
Click Configure [3].
Select the light grey box next to ‘Emergency’ [4]
The selected device will now be marked with an 'E' for emergency.
Add Comment