Find the light level of the luminaire (%) which gives you the required illuminance.
You need an external luxmeter.
Instruction:
Place the luxmeter in the center of the work area. Using the Test Mode, dim the luminaire until the required light intensity is obtained (eg. 300 lux). In this example, it's 34% brightness.
Proceed to “Configuration”
Set “On level Presence” to the value you measured (i.e. 34%).
Place the smartphone at the center of the working area and then click the “Calibrate Daylight Sensor”.
Wait until the calibration is over, light will turn On and Off multiple times.
It’s done!
Calibration is best done when there is no sunlight or there are windows blinds closed.
Add Comment