Features

The top most commonly used features are daylight harvesting, motion/presence detection and user interfaces such as panels or apps. If you need the more advanced feature, you should look at the HCL concept and time schedules. We have also a great lighting management solution for the most demanding customers.

To design the features below, as a basis, you need a Vertex ApC with DALI luminaires connected. There are some principles of DALI designing you have to know. For some purpose, or in the case of a large project, you might need also a LAN network.

1. Daylight harvesting

A fully automated adaptive lighting system adapts luminaire power to the intensity of daylight and the number of people present in a given space. Changes in natural daylight intensity (cloudiness, dusk) are detected by multisensors which subsequently transfer this information to the system. This allows the luminaires to automatically increase or decrease their power, maintaining a certain lighting intensity level in the room.

What do I need?

To use this feature, you need to have a DALI-2 sensor connected to the ApC. All sensors on the Glamox E2D component list are multisensors.

The instruction on how to program and commission this feature you can find in the Node-Red library - Daylight harvesting.

2. Motion/presence detection

Designing this feature you have to focus on the detection field. It depends on the mounting heigh. Note that the presence detection field is smaller than the motion detection field. All required information you can find in the product sheet (example).

What do I need?

To use this feature, you need to have a DALI-2 sensor connected to the ApC. All sensors on the Glamox E2D component list are multisensors.

The instruction on how to program and commission this feature you can find on the bottom of each product sheet (example).

User interfaces

(…)

What do I need?