...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Step by step instructions
Make sure you have the latest commission app software.
...
4. Click on the Bluetooth icon [1] and check if the DONGLE has firmware version 3.140 (or higher) [2].
...
5. Click the Luminairestab [3] and select the Site ID [4].
...
6. Select Firmware [5].
...
7. Select Library [6].
...
8. Find and select the Device Type in the top left dialog box [7].
...
9. Find and select Load [8] on the correct firmware version you wish to use located in the bottom left dialog box.
...
14. Once you have created your firmware rules, click Close [9]on the rule page and Close again on the Software Update page.
...
15. Click on the Luminairestab.
16. You will now see a RED Firmware value over the devices which you have set an update rule for.
...
18. To verify the update has been completed, select the device again and look at the top left corner of the commissioning app to identify the new Firmware version [10].
...