Page Comparison

Basically, to connect your installation to Glamox Connect you need an Access point as well as a gateway(s) connected to your local installation.

The access point is the one point connected to Glamox Connect. The access point communicates to the gateway(s) on the local network.

What do you need?

1. Access point

2. Gateway(s)

3. 24V power supply(s)

Example with multiple DALI gateways connected to Glamox Connect

The Access point needs to be connected to 24V power as well as ethernet connection.

The DALI gateway has two port for DALI connection, so you will need 1 gateway per two DALI lines in your installation. The DALI gateway is physically connected to the DALI lines, as well as connected to your local IP network. The DALI gateway needs 24V mains connection.

The Zigbee gateway can connect up to 100 devices and requires PoE or 230V power supply adapter, as well an ethernet connection.

...

Components

1. Access point - Access point: LMS CONNECT RevPi Core3+ATLAS

2. Local gateways to your systems:

   1. Ethernet2Dali (E2D) - LMS E2D VERTEX APC 3 (if you already have it in your installation, you don’t need to add another one) with internet connection

   2. Wireless Zigbee - LMS Zigbee Gateway

   3. DALI Complete - LMS CONNECT DALI/TCP GATEWAY

3. Ethernet switch ports for all access points - you can use LMS E2D IND SWITCH

4. Internet connection

Gateways limits

There is no hard limit to the number of gateways to 1 access point but recommendations are as follows:

• Ethernet2Dali - max 25 gateways (one cluster) per access point

• Wireless Zigbee - max 10 gateways per access point

• DALI Complete - max 8 gateways per access point