To correctly commission selt self test emergnecy luminaires , as a commissioning engineer, you must know the brand/emergency module part code. This will impact which emergency type you choose in profile settings and the results within the automated emergnecy lighting report.
| Info |
|---|
If you do not have the neccessary information regarding the emergency module, contact your Sales representative for further support. |
| Info |
|---|
For Self-Test emergency modules only. |
...
How to setup integrated self test emergency luminaires
...
Click Select the ‘Profiles’ tab [1]. Select/create the profile you wish use for the installed luminaires . Select [2]. Enter the Components view [3].
Open the Emergency Module drop down list [4] and select the matching emergency module make/modal [15].
Click ‘Save Changes’.
...
Remember to save changes!
...
Enter the Luminaires tab [5].
Select the device(s) on the drawing which has integral emergency.
Click Configure [36].
Select the light grey box next to ‘Emergency’ [47]
...
The selected device will now be marked with an
...
for emergency.
...