Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To speed up your commissioning you can also check the box Copy from previous device to prefill room and article number. This is very helpful if you commission all devices room by room, article by article, or even better if you have same articles in same room.

Emergency settings

Final setup for your site is to set up your emergency light monitoring under Settings → Emergency lights.
Here you can group your emergency lights, set a test schedule for the groups as well scheduling reports to be sent on email.

Info

Note: Only set the emergency groups and emergency schedule if you want to use Glamox Connect for emergency scheduling. If you use an other system for this, please skip these steps. Glamox Connect will still monitor the emergency devices and report it.

Test groups

In Glamox Connect you can organize you emergency devices in groups and see the groups in your floorplan(s). It is recommended that you organize the groups illogical in terms of physical location. This to avoid multiple devices in same location to be empty of battery after a duration test.

...

To generate initial group assignment for your emergency devices, press Generate at Settings → Emergency lights → Test groups. After initial assignment you can drag and drop the devices between the groups to create the best grouping for your installation.

You can view the groups in the floorplan by clicking on Floorplan

Test scheduling

After setting up the emergency groups, you can schedule when the emergency tests for the grouped

devices should run. Under Settings → Emergency lights → Test scheduling you can choose the intervals for functional- and duration tests, as well a start time for the schedule.

After pressing Generate Glamox Connect will create a schedule for the chosen values and present it. The schedule can be customized if you want to do changes on the generated schedule.

...

Scheduled reports

To schedule reports for your site, go to Settings → Emergency lights → Reports, add recipients and set a schedule. A condensed report with information for your site will be sent on email.