...
Create a new site
To create a new site, got go to the Glamox Connect home page by clicking on the logo or by visiting http://connect.glamox.com . In the left menu, at the top, you will find a button to Create new site
...
When the access point is back online, you can start adopting gateways from your local setup. If your network has multicast enabled, the access point will discover gateways and list the possible gateways for you to adopt. If this is not the case you can adopt gateways manually, by entering necessary information like ip address, mac address and more.
...
First, select the access point you want to connect the gateways to. Then you can proceed to click Adopt next to the gateway(s) you want to adopt, or click Adopt gateway manually
When you are done adding gateways to the access point, press Reload configuration in the next step. Not pressing reload will cause the gateways to be displayed as faults.
Discover devices
The last step you need to do is to discover devices. Glamox Connect will then create devices in Connect for all your local devices.
| Info |
|---|
Please note that commissioning of the local systems should be done prior to starting this process. If not properly commissioned, Glamox Connect will not be able to discover your devices (i.e. no short address, not connected to gateway ++) |
Just choose which system you want to discover devices from, select gateway (and lines if applicable and desired) and press Run. Connect will then request list of devices and listen for changes from your local installation. The progress and number of devices will be listed.
When you are done adding devices, press Reload configuration in the next step