Versions Compared

Old Version 24

changes.mady.by.user Julian Słowiński (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Jakub Cupiał

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

In a Vertex Action node Motion sensor mode is created to get the information from the motion sensor configured in a node (dali2devs or dali2common).

Input of the node:

...

These are commands received from Motion sensor:
{"payload": {"MSEVENT": 0}} - presence
{"payload": {"MSEVENT": 1}} - transition
{"payload": {"MSEVENT": 2}} - no presence

...

Note

You need to create a direct connection between a “device” node and a VA: Motion sensor node.

That’s because there is a list of devices in the Vertex Action node, and the logic behind it is waiting for all of the devices to report the No Presence event to turn off a group of luminaires.

Every flow “deploy” clears the list of devices that are connected to the Vertex Action.

...

Output of the node:

...

One of the above commands is sent directly to the vertex cluster node
OR
It can be splited by the msg.payload.MSEVENT value:

...

Tricks & tips:

  • Fake sensor events:

By using the "Inject" block into Vertex action, you are able to fake the action of a sensor, for example, to maintain the "Presence" state even in the absence of physical movement.

You need to send a msg.payload of { "MSEVENT": 0}; "UID" : "FAKE1" }:

...

titleFlow:

...

Global values

The CCT node outputs a brightness level in 0 to 100 range. On the other hand, the vertex action node outputs the brigthness in logarithmic scale. In order to use the CCT value for setting the brightness for motion sensor events, it needs to be properly converted to the logarithmic scale. Conversion is implemented in the “Global values“ flow section.

Import the ready made flow using the instructions here: Importing a Node-RED flow

Code Block
languagejson
[{"id":"463437f9.dd86a8","type":"tab","label":"Multiple sensors to Vertex Action","disabled":false,"info":""},{"id":"8b0cf8a1.a69ad8",

"type":"group",

"z":"463437f9.dd86a8",

"name":"
Correct
Main Flow",

"style":{

"stroke":"#92d04f",

"fill":"#e3f3d3",

"label":true,

"label-position":"n",

"color":"#009919"

},

"nodes":[

"e80d35a8.6d7d1",

"d361885a.96a2c8",

"39f5c80b.08bad",

"b88f58bc.dff27
",
"931d822f.61c8d",
"ec01ed4.c44cc9",
"61f904f6.91ebd4",
"bb07db98.3080b",
"90fa4b74.21e36",
"ff7fa553.91a68"
],
"x": 74,
"y": 139,
"w": 1422,
"h": 262
},
{
","ec01ed4.c44cc9","ea1c2fda.2cda1"],"x":234,"y":319,"w":1172,"h":242},{"id":"d176b7eb.c2ce1","type":"group","z":"463437f9.dd86a8","name":"Global values","style":{"stroke":"#a4a4a4","label":true,"color":"#777777","fill":"#d1d1d1","label-position":"n"},"nodes":["f610cec.980f33","6f775291.3e5eac","f4413f57.6b66b","4ba5ce99.ee955","eec241fa.c4cb4"],"x":234,"y":119,"w":672,"h":182},{"id":"e80d35a8.6d7d1",

"type":"vertex action",

"z":"463437f9.dd86a8",

"g":"8b0cf8a1.a69ad8",

"name":"Motion sensor",

"typeButton":"motionsensor",

"bPayload":{

"PRESENCE":{

"action":"setbrightness",

"group":
"1d606bc8d9eb7c1241805d7b07c81f1d"
null,

"param":"
50
100",

"priority":"255"

},

"TRANSITION":{

"action":"setbrightness",

"group":
"1d606bc8d9eb7c1241805d7b07c81f1d"
null,

"param":"50",

"priority":"0"

},

"NOPRESENCE":{

"action":"setbrightness",

"group":
"1d606bc8d9eb7c1241805d7b07c81f1d"
null,

"param":"0",

"priority":"254"

}

},

"bState":"",

"defaultpriority":true,

"x":
530
770,

"y":
260
440,

"wires":[

[

"
931d822f
ea1c2fda.
61c8d
2cda1"

]

]

},

{

"id":"d361885a.96a2c8",

"type":"dali2devs",

"z":"463437f9.dd86a8",

"g":"8b0cf8a1.a69ad8",

"name":"Motion Sensor no1",

"uid":"00000003A4214709BC",

"dali2dev":"0",

"instanceType":3,

"dali2t1":"10",

"dali2t2":"",

"mode":"",

"x":
190
350,

"y":
180
360,

"wires":[

[

"e80d35a8.6d7d1"

]

]

},

{

"id":"39f5c80b.08bad",

"type":"dali2devs",

"z":"463437f9.dd86a8",

"g":"8b0cf8a1.a69ad8",

"name":"Motion Sensor no2",

"uid":"00000003A4214709BC",

"dali2dev":"0",

"instanceType":3,

"dali2t1":"10",

"dali2t2":"",

"mode":"",

"x":
190
350,

"y":
260
440,

"wires":[

[

"e80d35a8.6d7d1"

]

]

},

{

"id":"b88f58bc.dff27",

"type":"dali2devs",

"z":"463437f9.dd86a8",

"g":"8b0cf8a1.a69ad8",

"name":"Motion Sensor no3",

"uid":"00000003A4214709BC",

"dali2dev":"0",

"instanceType":3,

"dali2t1":"10",

"dali2t2":"",

"mode":"",

"x":
190
350,

"y":
340
520,

"wires":[

[

"e80d35a8.6d7d1"

]

]

},

{

"id":"
931d822f
f610cec.
61c8d
980f33",

"type":"
switch
es cct",

"z":"463437f9.dd86a8",

"g":"
8b0cf8a1
d176b7eb.
a69ad8
c2ce1",

"name":
"Presence/Transition/NoPresence",
"property": "payload.MSEVENT",
"propertyType": "msg",
"rules": [
{
"t": "eq",
"v": "0",
"vt": "num"
},
{
"t": "eq",
"v": "1",
"vt": "num"
},
{
"t": "eq",
"v": "2",
"vt": "num"
}
],
"checkall": "true",
"repair": false,
"outputs": 3,
"x": 820,
"y": 260,
"wires": [
[
"bb07db98.3080b"
],
[
"ec01ed4.c44cc9"
],
[
"ec01ed4.c44cc9"
]
]
},
{
"id": "ec01ed4.c44cc9",
"type": "vertex cluster",
"","startTime":"07:00","finishTime":"19:00","colorLevels":[6500,2700],"colorLabels":["07:00","19:00"],"brightnessLevels":[100,0],"brightnessLabels":["07:00","19:00"],"sendFrequencyInMinutes":1,"cctMin":2700,"cctMax":6500,"x":320,"y":160,"wires":[[],["f4413f57.6b66b"]]},{"id":"ec01ed4.c44cc9","type":"vertex cluster","z":"463437f9.dd86a8","g":"8b0cf8a1.a69ad8","rate":5,"x":1310,"y":440,"wires":[]},{"id":"ea1c2fda.2cda1","type":"function","z":"463437f9.dd86a8","g":"8b0cf8a1.a69ad8","name":"Set presence state brightness value","func":"if(msg.topic.includes(\"MOTIONSENSOR/PRESENCE\"))\n{\n    for(var gr in msg.payload.parameter.value)\n    {\n\t     msg.payload.parameter.value[gr] = flow.get(\"level\");\n    }\n    return msg;\n}\nreturn msg","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":1040,"y":440,"wires":[["ec01ed4.c44cc9"]]},{"id":"4ba5ce99.ee955","type":"function","z":"463437f9.dd86a8",

"g":"d176b7eb.c2ce1","name":
"8b0cf8a1.a69ad8",
"rate": 5,
"x": 1390,
"","func":"\nfor(var gr in msg.payload.parameter.value){\n\t msg.payload=msg.payload.parameter.value[gr];\n}\n\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":620,"y":260,

"wires":[["6f775291.3e5eac"]

]},

{

"id":"
61f904f6
f4413f57.
91ebd4
6b66b",

"type":"vertex action",

"z":"463437f9.dd86a8",

"g":"
8b0cf8a1
d176b7eb.
a69ad8
c2ce1",

"name":"
Direct Value
",

"typeButton":"directv",

"bPayload":{

"action":"setbrightness",

"group":"
1d606bc8d9eb7c1241805d7b07c81f1d
02b2f16593e1a547148ffacde02898b2",

"param":0,

"priority":"254"

},

"bState":"",

"defaultpriority":true,

"x":
1240
470,

"y":
220
260,

"wires":[

[

"
ec01ed4
4ba5ce99.
c44cc9
ee955"

]

]

},

{

"id":"
bb07db98
6f775291.
3080b
3e5eac",

"type":"change",

"z":"463437f9.dd86a8",

"g":"
8b0cf8a1
d176b7eb.
a69ad8
c2ce1",

"name":"level_logarithmic",

"rules":[

{

"t":"set",

"p":"
payload
level",

"pt":"
msg
flow",

"to":"
level
payload",

"tot":"
flow
msg"

}

],

"action":"",

"property":"",

"from":"",

"to":"",

"reg":false
,
,"x":790,"y":260,"wires":[[]]},{"id":"eec241fa.c4cb4","type":"comment","z":"463437f9.dd86a8","g":"d176b7eb.c2ce1","name":"Conversion to logarithmic scale","info":"","x":
1060
630,

"y":220,

"wires":[]}]

This is an example flow related to Change node - Setting and triggering variables

Output of the node:

...

One of the above commands is sent directly to the vertex cluster node
OR
You can change its parameters halfway using the function node:

If the sensor detects presence, this function sets the brightness value to a global variable “level“.

...

Code Block
languagejs
//"Set the presence state brightnesss value" function code//

if(msg.topic.includes("MOTIONSENSOR/PRESENCE"))
{
    for(var gr in msg.payload.parameter.value)
    {
	     msg.payload.parameter.value[gr] = flow.get("level");
    }
    return msg;
}
return msg
Note

Starting from software version 3.1.22 the topic structure has changed due to a new feature that allows to share motion sensor state across all Vertexes in a cluster. The topic now provides additional information about Vertex MAC address to distinguish the source of information.

Tricks & tips:

  • Fake sensor events:

...

By using the "Inject" block into Vertex action, you are able to fake the action of a sensor, for example, to maintain the "Presence" state even in the absence of physical movement.

You need to send a msg.payload of {"MSEVENT": 0, "UID": "FAKE1"}

...

NodeRed flow:

Code Block
languagenone
[{"id":"ad9350e1.02ae9","type":"tab","label":"Flow 22","disabled":false,"info":""},{"id":"e5af922f.d1ad4","type":"group","z":"ad9350e1.02ae9","name":"Injects simulating sensor events ","style":{"stroke":"#3f93cf","fill":"#bfdbef","label":true,"label-position":"n","color":"#0070c0"},"nodes":["5255a035.80381","4df3c9f4.c54c38","fc6ab9c7.9d54c8","ad84f038.8e2d","76240bf4.3375a4","a76c72a9.cffa2","bf0d6277.52521","47b4dc22.a62664"],"x":214,"y":219,"w":1112,"h":262},{"id":"5255a035.80381","type":"vertex action","z":"ad9350e1.02ae9","g":"e5af922f.d1ad4","name":"Motion sensor","typeButton":"motionsensor","bPayload":{"PRESENCE":{"action":"setbrightness","group":null,"param":"50","priority":"255"},"TRANSITION":{"action":"setbrightness","group":null,"param":"50","priority":"0"},"NOPRESENCE":{"action":"setbrightness","group":null,"param":"0","priority":"254"}},"bState":"","defaultpriority":true,"x":670,"y":340,"wires":[["47b4dc22.a62664"]]},{"id":"4df3c9f4.c54c38","type":"dali2devs","z":"ad9350e1.02ae9","g":"e5af922f.d1ad4","name":"Motion Sensor no1","uid":"00000003A4214709BC","dali2dev":"0","instanceType":3,"dali2t1":"10","dali2t2":"","mode":"","x":330,"y":260,"wires":[["5255a035.80381"]]},{"id":"fc6ab9c7.9d54c8","type":"dali2devs","z":"ad9350e1.02ae9","g":"e5af922f.d1ad4","name":"Motion Sensor no2","uid":"00000003A4214709BC","dali2dev":"0","instanceType":3,"dali2t1":"10","dali2t2":"","mode":"","x":330,"y":340,"wires":[["5255a035.80381"]]},{"id":"ad84f038.8e2d","type":"dali2devs","z":"ad9350e1.02ae9","g":"e5af922f.d1ad4","name":"Motion Sensor no3","uid":"00000003A4214709BC","dali2dev":"0","instanceType":3,"dali2t1":"10","dali2t2":"","mode":"","x":330,"y":420,"wires":[["5255a035.80381"]]},{"id":"76240bf4.3375a4","type":"vertex cluster","z":"ad9350e1.02ae9","g":"e5af922f.d1ad4","rate":5,"x":1230,"y":340,"wires":[]},{"id":"a76c72a9.cffa2","type":"inject",

"z":"
463437f9
ad9350e1.
dd86a8
02ae9",

"g":"
8b0cf8a1
e5af922f.
a69ad8
d1ad4",

"name":"Presence",

"props":[

{

"p":"payload"

},

{

"p":"topic",

"vt":"str"

}

],

"repeat":"",

"crontab":"",

"once":false,

"onceDelay":0.1,

"topic":"",

"payload":"{\"MSEVENT\": 0, \"UID\": \"FAKE1\"}",

"payloadType":"json",

"x":
500
640,

"y":
320
400,

"wires":[

[

"
e80d35a8
5255a035.
6d7d1
80381"

]

]

},

{

"id":"
ff7fa553
bf0d6277.
91a68
52521",

"type":"inject",

"z":"
463437f9
ad9350e1.
dd86a8
02ae9",

"g":"
8b0cf8a1
e5af922f.
a69ad8
d1ad4",

"name":"No presence",

"props":[

{

"p":"payload"

},

{

"p":"topic",

"vt":"str"

}

],

"repeat":"",

"crontab":"",

"once":false,

"onceDelay":0.1,

"topic":"",

"payload":"{\"MSEVENT\": 2, \"UID\": \"FAKE1\"}",

"payloadType":"json
",
","x":650,"y":440,"wires":[["5255a035.80381"]]},{"id":"47b4dc22.a62664","type":"function","z":"ad9350e1.02ae9","g":"e5af922f.d1ad4","name":"Set presence state brightness value","func":"if(msg.topic.includes(\"MOTIONSENSOR/PRESENCE\"))\n{\n    for(var gr in msg.payload.parameter.value)\n    {\n\t     msg.payload.parameter.value[gr] = flow.get(\"level\");\n    }\n    return msg;\n}\nreturn msg","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":
510
960,

"y":
360
340,

"wires":[

[

"
e80d35a8
76240bf4.
6d7d1
3375a4"

]

]

}

]