Scenarios
Use one of the ready-made scenarios. All you need to do is copy the flow and change basic parameters such as time and brightness level.
Examples
Single office / classroom
Multi plan office
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|
Corridor
Sanitary room / toilet
...
This article is made to help you understand how programming is used in real life scenarios using Node-Red. These examples talk about the control scenarios, their components, the benifits you will get when using each scenario and a description of functionality. Each of them is linked to a different article in the Knowledge base, where we go into detail on how to set up a functionality.
...
Single office
Application | single office, kitchen |
|---|---|
Components | control panel (eg. 2 buttons) + sensor |
Benefits |
|
Scenario | The lighting turns on when you press the “ON” button. Luminaries adjust the light intensity depending on the amount of daylight (daylight harvesting). If you have Tunable White (CCT) luminaries, they work according to an HCL schedule. When you leave the room, sensor stops detecting the presence and turns the lighting off after 15 min.  Alternatively, you can turn off the lighting manually using the “OFF” button. |
...
Open plan office
Application | open plan office, open space |
|---|---|
Benefits |
|
Components | control panel (eg. 2 buttons) + sensor |
Scenario | The lighting turns on when you press the “ON” button. Luminaires adjust the light intensity depending on the amount of daylight (daylight harvesting). If you have Tunable White (CCT) luminaires, they work according to an HCL schedule. When you leave the room, sensor stops detecting the presence in your zone and dims the lighting after 15 min. If you don’t come back in an hour, the lighting turns off.  Alternatively, you can turn off the lighting manually using the “OFF” button. |
...
Classroom
Application | classroom, meeting room, conference room, board room |
|---|---|
Benefits |
|
Components | control panel (eg. 6 buttons) + sensor |
Scenario | The lighting turns on automatically. Luminaires adjust the light intensity depending on the amount of daylight (daylight harvesting). If you have Tunable White (CCT) luminaires, they work according to an HCL schedule. When you leave the room, sensor stops detecting the presence and turns the lighting off after 5 min.  You can also adjust the light manually using a control panel.  |
...
Corridor
Application | corridor |
|---|---|
Benefits |
|
Components | sensor |
Scenario | The lighting turns on automatically. When the sensor stops detecting the presence, the lighting dims after 5 min. If nobody comes in 10 min, the lighting turns off.  |
/wiki/spaces/ME/pages/2089353231
...
Toilet
Application | toilet, WC, sanitary room |
|---|---|
Benefits |
|
Components | sensor |
Scenario | The lighting turns on automatically. When you leave the room, sensor stops detecting the presence and turns the lighting off after 5 min. |