Page Comparison

Basically, to connect your installation to Glamox Connect you need an Access point as well as a gateway(s) connected to your local installation.

The access point is the one point connected to Glamox Connect. The access point communicates to the gateway(s) on the local network.What do you need?

...

Components

1. Access point -

...

1. Access point: LMS CONNECT RevPi Core3+ATLAS

2. Local gateways to your systems:

...

1. 1. Ethernet2Dali (E2D) - LMS E2D VERTEX

...

1. 1. APC 3 (if you already have it in your installation, you don’t need to add another one) with internet connection

   2. Wireless Zigbee - LMS

...

1. 1. Zigbee Gateway

   2. DALI Complete - LMS CONNECT DALI/TCP GATEWAY

2. Ethernet switch ports for all access points

...

1. - you can use LMS E2D IND SWITCH

2. Internet connection

...

Example with multiple DALI gateways connected to Glamox Connect

...

Gateways limits

There is no hard limit to the number of gateways to 1 access point , but recommendations are as follows

...

:

• Ethernet2Dali - max 25 gateways (one cluster) per access point

• Wireless Zigbee : Max - max 10 gateways per access point

• DALI Complete : Max - max 8 gateways per access point

Ethernet2DALI

Detailed information on the Ethernet2DALI gateway can be found here: https://glamox.atlassian.net/wiki/spaces/E2D

Wireless Zigbee

The Wireless Zigbee gateway requires PoE or 230V power supply adapter, as well an ethernet connection.

DALI complete

...