Versions Compared

Version Old Version 5 New Version 6
Changes made by

Matthew Hill

Matthew Hill

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Necessary components

Please select which DONGLE you have from the list below for product specific connecting instructions:

Step by step instructions for LMS WIRELESS DONGLE

  1. To connect a new DONGLE to the tablet select the Bluetooth Icon [1] and select 'LiteIPMate' from the drop down menu [2].

image-20240924-101901.png
Info

If you are connecting a BLE DONGLE, please select ‘GlamoxDongle’ from the drop menu and select 'no' when asked to include MicroSet.

  1. The app will start scanning for the nearest DONGLE(s) and will display them in a list [3]. This may take 20 seconds to a minute.

image-20240924-101833.png

  1. Look on the back of the DONGLE to find the matching MAC address and click ‘Connect’ on the correct DONGLE in the app list [4].

image-20240924-102116.png

  1. Once the DONGLE has connected, the Bluetooth icon will change from Grey to Blue.

image-20240924-105136.png
Info

If it doesn't connect:

  • Check DONGLE is On and Awake (Green LED is On or Flashing).

  • Check Mac address (beside Bluetooth icon on Tablet) matches DONGLE.

Info

The Mac address of the DONGLE is on the label on the back of the device.

IF MAC address starts with 10:**:**:**:**, THEN first two characters are 60:8A

Otherwise,

IF MAC address starts with 66:**:**:**:**, THEN first two characters are 00:06

Step by step instructions for LMS WIRELESS BLE DONGLE

The DONGLE BLE is a device that you might be needing to update the WR-G4 CPW2-SEN, WR-G4 CPW-SEN and G4-WR controllers to software version 6.8.135+ used with the LMS Wireless Kinetic Switch.

Connecting the LMS WIRELESS DONGLE BLE is a little different to connecting the regular DONGLE.

Info

Before using this device make sure that there are no new updates of Tablet App waiting for you in the App store. Without newest software this component will not work.

Info

When connecting a BLE DONGLE make sure that all regular DONGLE devices you have in the system are disconnected.

  1. Make sure you have turned on the BLE Glamox Dongle using the black switch on the side of the device.

  2. Click the Bluetooth icon.

  3. Select 'GlamoxDongle' from the drop down menu [1]

image-20240812-091025.png

  1. Choose 'No' to “Include MicroSet Devices?”

image-20240814-084649.png
Info

The tablet app might ask you if you want to initiate pairing, if this happens, agree to the request.

Once the BLE DONGLE is connected, the Bluetooth icon will trun from GREY to BLUE and a pop-ip message will dislpay you have successfully connected.

image-20240814-085000.png

↪ The next step: Identifying luminaires (on-site)