...
https://www.glamox.com/en/pbs/products/light-control/wireless-solutions/650001003/
Switching the DONGLE ON
Press pin in small hole once, red LED illuminates briefly.
Press again, green LED illuminates briefly.
Standby mode
The DONGLE automatically goes into standby mode when turned on if no momvement or activity occurs for 15 minutes.
To wake the DONGLE up, rotate the device 180 degrees. See LED Statuses section for more detail.
Switching the DONGLE OFF
Press pin in small hole once, red LED illuminates briefly.
Press again, green LED goes out.
LED Statuses
| Status | Activity |
|---|---|---|
Green LED | Off | Manually switched off or in standby |
2 flashes | Charging at 100 mA | |
3 flashes | Charging at 500 mA | |
10 second flash | Fully charged in standby (*) | |
1 second cycle | Running on internal battery | |
On | Fully Charged and Active | |
Red LED | 4 second flash | Running on battery but battery getting low. |
10 second flash | Asleep and battery getting low (*). |
How to use the device with the commissioning app?
...