Page Comparison

This article shows how to connect a Kinetic switch when you have a Dongle connected and luminaire are identified.

Necessary components

• LMS WIRELESS DONGLE

• LMS WIRELESS TABLET with the newest software, please make sure that there are no new updates waiting for you, if so, update the Tablet App before use.

...

...

Step by step instructions

1. Enabling the

...

Kinetic Master Luminaire:

1.1. Enter the Luminaires tab [1] and choose the open the configure option. Click on the desired luminaire with CPW2-sen [2] to pair with the EnOcean Kinetic switch (this will act as the EnOcean Kinetic Master).

1.2. Click ‘Configuration' [3] and tick the ‘Enable EnOcean’ box (EO) [4]. A virtual EnOcean Kinetic switch device will appear next to the device on the drawing [5]. The EnOcean Kinetic Switch ID will be the digits of the luminiare and a zero (on the drawing you will see a shortcut).

...

2. Pairing EnOcean Switch to EnOcean Master luminiare

2.1. Click on the virtual EnOcean Kinetic Switch Luminaire [6].

2.2. Click the ‘Pair’ button [7] to activate commissioning mode.

...

2.3. Perform the following steps on the physical EnOcean Kinetic switch:

• press button for seven seconds

• Release button

• Tap the same button

• Release button

• Press button for seven seconds

...

3. Establishing Links for Scene Control

To perform these actions go to the Luminaires tab and to the Link option [8].

3.1. Linking virtual

...

Kinetic Switch device and

...

Kinetic Switch Master luminaire to self

Click on the EnOcean Kinetic Switch Master luminaire [9] and select ‘Link to Self' [10].

Repeat the process for the virtual EnOcean Kinetic switch device [11] .

...

3.2. Linking virtual

...

Kinetic switch device to

...

Kinetic Master luminaire

Draw a directional presence link from the virtual EnOcean Kinetic switch [12] to the EnOcean Kinetic switch Master luminaire [13] .

...

3.3. Linking to other Wireless Radio devices

Draw directional prescence links from the virtual EnOcean Kinetic switch device [14] to other surrounding devices which need to be controlled by the EnOcean Kinetic switch.

You can also create presence links by highlighting the devices you want to be linked and click ‘Link from x', using the virtual EnOcean Kinetic switch device serial ID.

...

4. Creating and Assigning the

...

Kinetic Switch Scene Profile/Settings:

We now need to create dedicated profiles for the EnOcean Kinetic switch to work from.

4.1. Enter the ‘Profiles’ tab [15] and from the drop down menu[16] , choose ‘NEW PROFILE’.

4.2. Make sure the Controller type is set to SceneController [17] and in the Advanced mode [18] the Dim Up/Down option is ticked [19].

4.3. Save the changes [20] and remember the profiles number, you will be needing it later.

...

4.4. In the ‘Luminaires’ tab, select the new Virtual EnOcean Kinetic Switch device [21]. Go to ‘Configure’ [22] and from the ‘Scene Profile’ dropdown menu [23] select the newly created EnOcean Scene Kinetic switch scene profile.

...

4.5. Enter the ‘Scene’ tab [24] and select the ‘EnOcean ‘Kinetic Switch Master’ serial number in the Scene Controller drop down menu [25].

4.6 Apply the linked profiles from the drop down menu [26] and press 'Sync'.

...

4.8 Go back to the ‘Luminaires’ tab and make sure the EnOcean Kinetic Switch Master Configuration is sync’d.

4.9 Proceed to use the EnOcean LMS Wireless Kinetic switch.

...