This article shows how to connect Greenpower switch when you have BLE Dongle connected and luminaire is identified.
Necessary components
NEED TO ADD 4-WAY ENOCEAN BUTTON
NEED TO ADD 2-WAY ENOCEAN BUTTON
| Info |
|---|
Requires a Glamox Wireless Radio luminiare with CPW2-SEN sensor. |
Step by step instructions
To have connection with greenpower switch you have to press button in specific way.
Enter the Luminaires tab and choose the open the configure option. Choose master luminaire and turn on enocean checkbox
As on the upper screen . In the box there will be a change from “-” to “EO”.
The EnOcean ID will be last three digits of the luminiare and adding a zero.
To have connection with greenpower switch you have to press button in specific way.
Open the greenpower icon and select the scene profile related to our luminaire.
Go to profile tab the Profiles tab and create a profile that you will be using for Greenpower switches and make sure that LiteIP is set to SceneController and Driver is set to DALI. If you would like to dim up and down luminaire also remember to check Dim Up/Down box.
Click save changes.
Now in the Luminaires tab you can select scene profile like belowfor your lumianire.
Set Setting up the scenes
Click In the luminaires tab click on the EnOcean icon again and on so that the upper left corner ID number of controller can bee seen.
go back to scene Go To the Scenes tab and select scene controller with the same ID
each so in this case 10162240. Each scene corresponds to a button . In one scene you can control many luminaire with different profiles.
You can also get go into advanced scenes settings. To do that go to the profiles tab and select Advanced
If you come back to the scenes tab again there will be much more settings here
.
If you check Synchronise Profiles box all setting will be the same for all profiles.
Link Linking the luminaires
Go to In the link Luminaires tab go to Link and select all luminaires. Then go to the Link From X option and at link form , a box will open called “link form” type entire number of greenpower button which you want the luminaires linked to.
Pair greenpower switch
As the last step press the Pair button. If pairing is successful the master luminaire should blink three times.
