To correctly commission self test emergnecy luminaires you must know the brand/emergency module part code. This will impact which emergency type you choose in profile settings and the results within the automated emergnecy lighting report.
...
Select the ‘Profiles’ tab [1]. Select/create the profile you wish use for the installed luminaires [2]. Enter the Components view [3].
Open the Emergency Module drop down list [4] and select the matching emergency module [1].
Remember to save changes!
...
Enter the Luminaires tab [5].
Select the device(s) on the drawing which has integral emergency.
Click Configure [6].
Select the light grey box next to ‘Emergency’ [7] The selected device will now be marked with an
for emergency.
...