To correctly commission selt test emergnecy luminaires, as a commissioning engineer, you must know the brand/emergency module part code. This will impact which emergency type you choose in profile settings and the results within the automated emergnecy lighting report.
...
Click the ‘Profiles’ tab.
Select/create the profile you wish use for the installed luminaires.
Select the matching emergency module make/modal [1].
Click ‘Save Changes’.
...
Click Luminaires [2].
Select the device(s) on the drawing which has integral emergency.
Click Configure [3].
Select the light grey box next to ‘Emergency’ [4]
...
The selected device will now be marked with an 'E' for emergency.