Necessary components
(WIP) LMS WIRELESS SCENE CONTROLLER BATTERY
...
2 x AAA batteries is required.
...
Programming
Replace with 230v and battery scene controller commissioning stages (include tablet screenshots)
When not in use the device is in deep-sleep mode to conserve battery power. Pressing a button wakes the device up, transmits the message, then goes back to sleep.
In order to identify the device or upload setting to it, switch to Commissioning mode by clicking any button to wake it up then any two buttons for 3 seconds to enter programming mode. Scenes will not be broadcast while in commissioning mode. To exit commissioning mode, do not press any buttons or send any commands for 30 seconds.
...
| Info |
|---|
The batteries will last for more than 5 years with up to 50 activations per day. |