...
It is a digital phase dimmer for controlling decorative lighting such as halogens and/or LED retrofit bulbs. You can connect it with a control panel or a sensor in your DALI installation.
...
Dimensions
...
Technical parameters
...
Rated supply voltage
...
230 – 240 V
...
Mains frequency
...
50 / 60 Hz
...
Connected load
...
300 W
...
Current consumed from the DALI bus
...
2 mA
...
Number of occupied DALI adresses
...
1
...
Ambient temperature ta
...
0 ... +50°C
...
Type of protection
...
IP20
Wiring diagram
...
How to use it in the LMS design?
When using the multisensor in a project, you need to remember the typical Ethernet2DALI limitations.
The maximum DALI current consumption of this device is 2 mA. It takes one DALI address on the DALI line. Bulbs with a maximum total power consumption of 300 W can be connected to the phase dimmer.
...
How to use it in the LMS design?
When using the phase dimmer in a project, you need to remember the typical Ethernet2DALI limitations.
| Info |
|---|
Not all LED bulbs are dimmable. Before use, check the product datasheet. |
...