...
Charge for 24 hours before undertaking commissioning using the supplied MicroUSB lead.
To turn on, insert a pin into the small hole on the right hand side of the device. Wait for the red light on the front of the device to flash and then tap again.
The top light will now go turn green and then slowly flash green.
To turn off, insert a pin in the small hole and hold until both lights go turn off.
...
Overall dimensions drawing
...
Manual Switching
Switch On
...
Device goes back into Standby after 3 minutes If if Bluetooth is not connected.
Device goes into standby if no movement or activity occurs for 15 minutes.
Plugged into USB on Slow Charge
...