After you have located the simulated devices, you need to identify and replace them with real devices.
Instructions
Select Locate.
Ensure your DONGLE is connected and Bluetooth Symbol is illuminated (see First connection).
Select Find, if you are in the range of devices, the list will populate with up to 9 devices.
...
| Info |
|---|
If you have not simulated devices, click and hold the device and drag it onto the drawing and position it manually. If you drag a luminaire onto the wrong drawing, this can be dragged back off the drawing or into the Find Bar so it can be found again. If you are too far from one of the found devices:
|
Emergency luminaires
If you have emergency luminaires, these should be identified at this stage of the process. This should always be done in accordance with the drawings, with a visual check of the luminaire to make certain it is an emergency luminaire.
...