Wireless ZigBee Button is a button switch which is designed for use in the Glamox Wireless ZigBee system.
No wiring and lack of power connections give wide possibilities of mounting. Installation is easy and the device does not require maintenance.
The device also does not need internal battery or any external power supply. Energy source is an electro-dynamic energy generator inside the switch.
The comfort of the usage is very high due to low mechanical force needed for pressing the buttons.
In addition to conventional ON/OFF control you can use this button for dimming the light and triggering lighting scenes
LMS ZIGBEE GREENPOWER 2B
LMS ZIGBEE GREENPOWER 4B
Item requires additional frame: https://www.glamox.com/en/pbs/products/indoor/downlight/1411701/
LMS design rules
No battery and no wiring
Distance to the first sensor has to be less than 10 meters (in a line of sight)
ON/OFF control and dimming
Gluing or screwing onto the flat surface
Commissioning procedure (HAS TO BE CONFIRMED!)
<graphic> or <gif>
| Drawio sketch | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
For commissioning a switch into a group, the cover does not need to be removed.
Please follow the steps given below, once the app asks you to:
Long press – Press and hold the button on the top right for 10 seconds
If the MasterConnect App feeds back a beep and a message that the switch has been detected,
you must directly proceed to step 2.Otherwise, repeat step 1 for the other buttons until the MasterConnect App feeds back a beep
and a message. After that proceed to step 2.
Short press – Press and hold the button on the top right and bottom left for 1 second to finalize the
switch linking.