In the presence of daylight, the output from a luminaire is regulated to achieve a target light level on the working plane work space to save energy. Find the light level of the luminaire (%) which gives you the required illuminance and then perform a calibration.
| Info |
|---|
You need an external luxmeter. |
Instruction:
Place the luxmeter in the center of the work area. Using the Test Mode, dim the luminaire until the required light intensity is obtained (eg. 300 lux). In this example, it's 34% brightness.
2. Proceed to Configuration
and click “Edit configuration”select Edit configuration.
3. Set “On On level Presence” Presence to the value you measured (i.eeg. 34%).
4. Place the smartphone at in the center of the working work area and then click select the “Calibrate Calibrate Daylight Sensor”Sensor.
5. Wait until the calibration is over, meanwhile lights will turn On and Off multiple times.
6. It’s done!
| Info |
|---|
Calibration is best done when there is no sunlight or there are windows blinds closed. |