Page Comparison

Savings

• reducing energy consumption by using daylight

• automatic dimming in your zone after leaving the room

• automatic switching off after a long absence

Components

control panel + sensor

Scenario

The lighting turns on when you press the “ON” button. Luminaires adjust the light intensity depending on the amount of daylight (daylight harvesting). If you have HCL Tunable White (CCT) luminaires, they work according to a circadian modeHuman Centric schedule. When you leave the room, sensor stops detecting the presence in your zone and dims the lighting after 15 min. If you don’t come back in an hour, the lighting turns off.

Image Removed

Image Added

Alternatively, you can turn off the lighting manually using the “OFF” button.

Savings

• reducing energy consumption by using daylight

• automatic switching off after leaving the room

Components

control panel + sensor

Scenario

The lighting turns on when you press the “ON” button. Luminaires adjust the light intensity depending on the amount of daylight (daylight harvesting). If you have HCL luminaires, they work according to a circadian mode. When you leave the room, sensor stops detecting the presence and turns the lighting off after 15 min.

Image Removed

Image Added

Alternatively, you can turn off the lighting manually using the “OFF” button.

Additional manual control via control panel:

Savings

• automatic dimming after leaving the corridor

• automatic switching off after a long absence

Components

sensor

Scenario

The lighting turns on automatically. When the sensor stops detecting the presence, the lighting dims after 5 min. If nobody comes in 10 min, the lighting turns off.

Image Removed

Image Added

Savings

• automatic switching off after leaving the room

Components

sensor

Scenario

The lighting turns on automatically. When you leave the room, sensor stops detecting the presence and turns the lighting off after 5 min.

Image Removed

Image Added