Page Comparison

...

1. Access point - LMS CONNECT RevPi Core 3 8GB 8 GB

2. Local gateways:

   1. Ethernet2DALI Ethernet2Dali - LMS E2D VERTEX ApC 3

   2. Wireless Zigbee - LMS CONNECT ZIGBEE GATEWAY PoE

   3. DALI Complete - LMS CONNECT DALI/TCP GATEWAY

3. 24V 24 V power supply(s) - LMS E2D POWER SUPPLY 24V 30W

4. Ethernet switch ports for all access points and gateways - LMS E2D IND SWITCH

5. Internet connection - you can use LMS E2D REMOTE ACCESS KIT as a GSM gateway

...

The Access point needs to be connected to 24 V power as well as ethernet connection. There is no hard limit to the number of gateways to 1 access point, but recommendations are as follows:

• Ethernet2DALIEthernet2Dali: Max 25 gateways (one cluster) per access point

• Wireless Zigbee: Max 10 gateways per access point

• DALI Complete: Max 8 gateways per access point

...

Ethernet2Dali

Detailed information on the Ethernet2DALI Ethernet2Dali gateway can be found here: https://glamox.atlassian.net/wiki/spaces/E2D

...

The Wireless Zigbee gateway requires PoE or 230V power supply adapter, as well an ethernet connection.

DALI complete

The DALI complete gateway has two ports for DALI connection, so you will need 1 gateway per two DALI lines in your installation. The DALI gateway is physically connected to the DALI lines, as well as connected to your local IP network. The DALI gateway needs 24 V mains connection.

...