Versions Compared

Old Version 6

changes.mady.by.user Katarzyna Stodolny

Saved on

compared with

New Version 7

changes.mady.by.user Katarzyna Stodolny

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • G2 Controller - select this if you have a DT10 or DT18 installedSlimline Controller - select this if you have a Slimline Controller DT19 luminaire controller installed

  • If you have an integral

    P1, P2 or P4 Occupancy Sensor

    presence sensor (3.3v PIR or Microwave) installed tick PIRENABLED in the PIR

    BoxIf you have an integral 230v PIR or Microwave installed, leave PIRENABLED unticked and select Switch in the Controller

    Box

  • PIR Timeout

    • Click PIR > PIRTIMEOUT to enter the desired timeout.

  • Microwave - select this if you have a Wireless Radio CMW Sensor

    • The controller box will automatically change to Microwave

  • Scene Controller - select this if you are setting up a scene controller

    • No other settings will be applied and you can Save Changes

  • E3Module - select this if you have Wireless Radio stand-alone emergency luminaire or integral emergency.

  • Save Changes

E3Module

  • If there are emergency fittings of this luminaire type this select the E3 Module Box and the appropriate Emergency Manufacturer. It is not necessary to have a standalone profile for emergency and non-emergency luminaires of the same type.

...