Interface device to translates Android Tablet messages to the Wireless Radio Protocol.
Product Image
...
Product Features
Used in conjunction with Wireless Radio software and Android tablet.
Kept in your pocket when in use for commissioning or monitoring.
Stored on your desk plugged into USB port for charging when not in use.
Hardware Connections
MicroUSB lead supplied. If replaced always use a sync lead and not a charge only lead.
Charge from Mains, Car or for the most efficient charge, via a PC USB socket.
Preserves battery life when not in use by going into standby mode after 15 minutes of inactivity.
Physically rotate to wake from standby mode.
24 hours continuous use battery life when being used for commissioning.
30 days battery life when in standby mode.
Operation
Charge for 24 hours before undertaking commissioning using the supplied MicroUSB lead.
To turn on, insert a pin into the small hole on the right hand side of the device. Wait for the red light on the front of the device to flash and then tap again.
The top light will now go green and then slowly flash green.
To turn off, insert a pin in the small hole and hold until both lights go off.
Line Drawing
...
...
Part Code
...
Description
...
LiteIP-Mate
...
LiteIP Interface Device
Downloads
Specification Guide - DT12 - LiteIP Mate.pdf
Specification Guide - DT12 - LiteIP Mate.pdf - 428KB