...
This is the Home Page for the LiteIP Wireless Radio Control App. You can return here at any point by tapping on the site postcode. On this page you can view the sites you have set up locally on the tablet or have available to download from the server.
...
For the commissioning process to be as accurate as possible, drawings need to be imported onto the tablet. The most common way to do this is to provide LiteIP Wireless Radio with drawings when the LiteIP–Tablet–Pack is ordered.
...
Drawings can be manually imported onsite as follows:
Send the drawing to LiteIP Wireless Radio to resize and convert into a bmp file
Download and Save the file to the tablet
Load the LiteIP Wireless Radio Commissioning App > Drawings > New
Import a Drawing File by selecting Browse
Select the file and tap Okay
...
In order to replace simulated devices with real devices:
Tap Locate, ensure your LiteIP Mate DONGLE is connected and Bluetooth Symbol is illuminated
For further details on connecting LiteIP Mate DONGLE - see Application Note - LiteIP Mate
Press Find, if you are in range of LiteIP Wireless Radio devices, the list will populate with up to 9 devices
...
When locating luminaires and you find an emergency luminaire -:
Tap ‘Configure’ in the bottom left of the screen and select Emergency on the left hand side
This will apply an 'E' to the selected fitting for identification
...
Select the Driver, this will bring up the following options -.
...
Select the Driver for the fitting -:
Fixed Output - will not be dimmable will switch on/off only
DALI or 1-10v - will allow the following settings to be applied
...
Select the required settings for this profile -:
OnLevel - the maximum on level of the luminaire
FadeTime - the length of time the fitting will take to fade to Standby Level
StandbyLevel - the level of the luminaire once it is dimmed
StandbyTime - the length of time the luminaire remains at the Standby Level
Set at 127.5 for Never Off
PowerOn - enter the wattage of the luminaire at full output
DayNightEnabled - See Application Note - Building Occupied & Unoccupied Mode
Save Changes
...
G2 Controller - select this if you have a DT10 or DT18 installed
Slimline Controller - select this if you have a Slimline Controller DT19 installed
PIR Timeout
Click PIR > PIRTIMEOUT to enter the desired timeout.
Microwave - select this if you have a LITEIP Wireless Radio combined M1, M2 or D4i Microwave
The controller box will automatically change to Microwave
Scene Controller - select this if you are setting up a scene controller - DT14, DT23, DT21
No other settings will be applied and you can Save Changes
E3Monitor - this device can only monitor emergency fittings and not control the luminaire - see Emergency Monitor DT15
Tridonic E3M - This is a specific Tridonic device
Save Changes
...
Once you have created your profiles, they can be applied to the LiteIP Wireless Radio devices.
Select Luminaires > Configure
Select an individual device or group of devices by swiping your finger across a group of devices
Tap Profile and the drop down list will appear
...
Multiple Links
Select the group of fittings you'd like to link by dragging your finger over them
You will be presented with 6 options -
...
Link All(xx) - this will link all luminaires together so that presence detected on any sensor will bring the other linked fittings on
Unlink All - this will remove all presence links for the group of devices
Link From X - this will provide a link from another device. If you select this option you will be prompted to enter the full device number
Link To X - this will provide a link to another device. If you select this option you will be prompted to enter the full device number
Link to Self – Link luminaires to themselves so they will operate independently
Me&2 - this will allow for smaller groups of fittings to be linked within a large group and is typically used in open areas.The '2' can be changed to a larger number with a long press on the 'Me&2'button
To implement -
highlight the whole group to be controlled in this way
long press Me&2
a popup box will prompt you to enter the group size > save
press the Me&xx button again (this will now display the number you entered)
a diagram will appear on the drawing
confirm to apply or cancel to change
...
It is important that the commissioning tablet is the Master and is Uploaded to the cloud for several reasons:-
Unless the Project is uploaded to the cloud, no information will be available on the internet Dashboard.
Unless the Project is uploaded to the cloud, the Collators ACCESS POINTs (if installed) will not be able to upload information to the Cloud.
If the project is uploaded to the Cloud then it will be available for other authorised tablet users to download and potentially take control of.
If you lose or break your tablet, having a backup in the Cloud will allow you to restore the project onto a new tablet.
...
To Upload -:
Ensure the tablet is connected to the internet
Click on the blue Wi-Fi symbol > the yellow Cloud Control Box will appear
Ensure that Read Access, Write Access, Enabled, Uploading and Master are ticked
Press Re-sync
...