Versions Compared

Version Old Version 1 New Version 2
Changes made by

Katarzyna Stodolny

Katarzyna Stodolny

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

It is really helpful to draw a schematic LAN network diagram. Remeber about following Arrange all vertexes on the project according to the design rules. Choose the right number of LAN switches. Remember about additional devices such as cloud gateway and connection to the BMS.

LAN network design rules:

  1. The maximum distance between devices is 100 m.

  2. To connect BMS use Modbus TCP/IP.

  3. LAN switch requires external power supply.

...

Info

Good practices:

  • Do not use all switch outputs – leave a reserve in case of system expansion or the need for service intervention.

If you have a larger project:

...

Large project with more Vertexes:

  1. Up to 25 Vertexes can work in one group (cluster). If you need more Vertexes are required, create another clustermore clusters.

  2. One access point E2D REMOTE ACCESS KIT can be connected to one cluster. If you have there are more clusters, you should add new access pointsmore devices should be added.

...